NOTE
ABOUT WELDING: All weld-in kits come with welding instructions to avoid
damaging your roof paint. Each bracket is actually brazed in with a
low temp welding rod. The bracket and uni-body metal are not heated
to merge point. Instead the low temp welding rod is melted. A damp towel
is place on the roof during brazing to give extra insurance against
roof damage. Welding must be performed by a qualified weldor.
$40 IS INCLUDED IN THE COST OF EACH KIT
TO COVER SHIPPING
All panels are shipped between 1"
thick high density foam blocks. Prior to being secured between foam
blocks the sunroof panel is wrapped in plastic sheet.
The assembly is then packaged in a custom made shipping
box to ensure safe shipping. We take extreme care in packaging each kit because
we know shipping couriers don't always take the same care. This shipping
and handling charge covers our direct costs involved.
Sunroof Plug kit for 92-95
Civic Hatch/Coupe
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and vacuum infused carbon fiber sunroof plug
4. Bracket Locating Tool
5 . 16 Custom bent and punched steel panel brackets
NOW WELD IN!!
6 . 16 Countersunk machine screws, black coated, stainless steel and
nylock nuts
7. 2.7 oz. tube of Loctite Superflex black RTV silicon
8. Small carbon rectangle for test drilling
$415.00 SHIPPED
Product Notes: This kit takes about 4
hours to install and can be installed using simple shop tools. Some
customers may decide to re-install the headliner. Should you decide
to re-install the headliner please note that you will loose the use
of your factory dome light. This is due to the fact that the factory
sunroof assembly has the mounting bolts attached to it. Due to the nature
of this product this won't be a problem for most customers. It is possible
to retrofit the factory dome light into the headliner by cutting out
a plate made of any rigid material a few inches larger than the headliner
light opening. Once this is done you can drill two holes through the
plate at points corresponding to the hole locations in the dome light
assembly. Next run two long bolts through the holes making sure they
are long enough to run through the assembly and then use Nylock nuts
to make sure these bolts wont turn. Finally, feed the plate through
the headliner once its re-installed and sandwich the headliner between
the rigid plate that you cut and the factory dome assembly. Now simply
install as normal.
- Sunroof Plug Kit for 97-01
Prelude
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and UV clear coated carbon fiber sunroof plug
4. Bracket locating tool
5. 6- ¾ WIDE steel“L” brackets with one pre-punched
hole on the top side
wide brackets are only used on the rear side of the sunroof plug
NOW WELD IN!!
6. 12- ½” NARROW aluminum “L” brackets with
pre-punched holes in both sides.
(narrow brackets are used on the driver, passenger, and front sides
of the panel)
7. 12 3/16” aluminum drive rivets
- 8. 21 Countersunk machine screws, black coated,
stainless steel and nylock nuts
9. 4- ½” NARROW steel“L” brackets with pre-punched
holes in both sides.
(narrow steel brackets are used on the 4 corners of the panel NOW
WELD IN!!)
10. 2.7 oz. tube of Loctite Superflex black RTV silicon
11. Small carbon rectangle for test drilling
$415 SHIPPED
Sunroof Plug Kit 90-93 Integra
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and UV clear coated carbon fiber sunroof plug
4. Bracket locating tool
5. 15 Custom bent and punched steel panel brackets
NOW WELD IN!!
6. 5- .75" wide flat brackets
7. 20 Countersunk machine screws, black coated, stainless steel and
nylock nuts
8. Superglue tube for temporarily tacking brackets
9. J-B Weld adhesive kit (hardener/resin)
10. 2- Small paintbrushes

11. 2.7 oz. tube of Loctite Superflex black RTV silicon
12. Small carbon rectangle for test drilling
$415 SHIPPED
Sunroof Plug Kit 94-01 Integra
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and UV clear coated carbon fiber sunroof plug
4. 1- bracket locating tool
5 . 16 Custom bent and punched steel panel brackets
NOW WELD IN!!
6. 16 Countersunk machine screws, black coated, stainless steel and
nylock nuts
7. 2.7 oz. tube of Loctite Superflex black RTV silicon
8. Small carbon rectangle for test drilling
$415 SHIPPED
Sunroof Plug Kit 96-00 Civic
Hatch/Coupe
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and UV clear coated carbon fiber sunroof plug
4. Bracket locating tool
5. 15- ½” NARROW aluminum “L” brackets with
pre-punched holes in both sides.
(narrow brackets are used on the driver, passenger, and front sides
of the panel)
6 . 5 Custom bent and punched steel panel brackets
NOW WELD IN!!
7. 20 Countersunk machine screws, black coated, stainless steel and
nylock nuts 
8. 15 3/16” aluminum drive rivets
9. 2.7 oz. tube of Loctite Superflex black RTV silicon
10. Small carbon rectangle for test drilling
$415 SHIPPED
Sunroof Plug Kit for 88-91
CRX SI
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and UV clear coated carbon fiber sunroof plug
4. Bracket locating tool
5. 23 aluminum drive rivets, includes 1extra
6. 23 clear anodized aluminum “L” brackets, includes 1extra
7. 23 Countersunk machine screws, black coated, stainless steel and
nylock nuts
8. 2.7 oz. tube of Loctite Superflex black RTV silicon
9. Small carbon rectangle for test drilling
$415 SHIPPED
Sunroof Plug Kit for 92-96
Prelude
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and UV clear coated carbon fiber sunroof plug
4. Bracket locating tool
5. 16 - ½” NARROW aluminum “L” brackets with
pre-punched holes in both sides.
(narrow brackets are used on the driver, passenger, and front sides
of the panel)
6. 16 3/16” aluminum drive rivets
7. 4- ½” NARROW steel“L” brackets with pre-punched
holes in both sides.
(narrow steel brackets are used on the 4 corners of the panel NOW
WELD IN!!)
8. 21 Countersunk machine screws, black coated, stainless steel and
nylock nuts
9. 2.7 oz tube of Loctite SuperFlex silicon, black
10. Small carbon rectangle for test drilling
$415 SHIPPED
Sunroof Plug Kit for 88-91
Civic SI
1. Install instruction booklet
2. Bracket locating diagram
3. Water jet cut and UV clear coated carbon fiber sunroof plug
4. Bracket locating tool
5. 10- ¾ WIDE “L” brackets with one pre-punched hole
on the top side (NOW WELD-IN STEEL)
6. 10 3/16” aluminum drive rivets 
7. 16 Countersunk machine screws, black
coated, stainless steel and nylock nuts
8. 5 water jet cut super long aluminum brackets with two rivet holes
for the rear of sunroof flange

9. 2.7 oz. tube of Loctite Superflex black RTV silicon
10. Small carbon rectangle for test drilling
$415 SHIPPED
Lighterfaster.com
801.471.4150